A fabric step and repeat banner for polished indoor events

This custom fabric step and repeat banner is printed on premium tension fabric for events where the backdrop should look as refined as the room: galas, weddings, corporate dinners, product launches and press events. The fabric has a smooth, matte surface that photographs cleanly on camera and on video, and it is printed to the width and height you choose.

Key features

• Made to measure: set each side anywhere between 4 and 50 ft, one foot at a time.
• 270 GSM (8 oz) premium tension fabric that is wrinkle-resistant and stretch-friendly.
• NFPA 701 fire-resistant certified, worth noting if your venue asks for fire-rated materials.
• Matte, non-reflective surface that keeps glare down in photos and video.
• Dye-sublimation printing for long-lasting, high-resolution graphics with a soft, elegant color look.
• Four finishing options: grommet with Bravo tab, pole pockets (top and bottom, or top only), or no hem and no grommets.
• Sold as the printed banner alone; a stand and a red carpet can be added to the order.
• Lowest Price Guarantee on every order.

What is a Bravo tab?

A Bravo tab is a clear plastic tab with a grommet, added along the edge of the banner. You hang the banner by the tabs, so the fabric itself can be hung without tearing. Choose pole pockets instead if the banner will slide onto a stand's crossbars.

Fabric or vinyl?

Both are matte and both carry your repeating pattern; the difference is where and how they are used. Fabric gives a softer, more upscale look and resists wrinkles, and it is designed for indoor and controlled-lighting settings. Vinyl prints with stronger color, works indoors and outdoors, and is the better pick for outdoor events. If that sounds closer to your plans, see the custom vinyl step and repeat banner.

How to order

1. Set your dimensions in the size boxes.
2. Decide how the edges should be finished for your stand or frame.
3. Upload your logos, sponsor graphics or a full layout, pick a ready-made design from our step and repeat templates, or build the pattern free in our Design Center. You can ask to see a proof before printing.
4. Include a stand or carpet if the venue has nowhere to hang it.

Before you order

Is the fabric fire-resistant?
Yes. It is NFPA 701 fire-resistant certified.

Can I use a fabric backdrop outdoors?
It is designed for indoor and controlled-lighting environments. For outdoor events, the vinyl version is the better fit.

Will the colors look the same as vinyl?
Not exactly. Dye-sublimated fabric has a softer, more elegant color appearance than vinyl.

What can be changed after the proof?
Placement and size, and proofs are free with no limit on rounds: we can shift a logo, scale one up or down, or tighten the spacing, and change the edge finishing before it prints. We don't draw new artwork, so the design itself comes from your files, a template or the Design Center.

Can I pick it up?
Yes. You can choose local pickup at one of our locations in Duluth, GA; Egg Harbor Township, NJ; Carrollton, TX; or Las Vegas, NV.

Is there a ready-made size?
Yes. See our standard fabric sizes and fabric banner and stand sets.